AKG D7 (S) Specifications download pdf (Page 15)

The microphone provides a balanced output on a 3-pin male

XLR connector:

Pin 1: ground

Pin 2: hot

Pin 3: return

You can connect the microphone either to a balanced or an un-

balanced microphone input.

• To connect the microphone to a balanced input (XLR con-

nector), use a commercial XLR cable.

• To connect the microphone to an unbalanced microphone

input (1/4" jack), use a cable with a female XLR connector

and a 1/4" TS jack plug.

• Please note that unbalanced cables may pick up interfer-

ence from stray magnetic fields near power or lighting ca-

bles, electric motors, etc. like an antenna. This may cause

hum or similar noise when you use a cable that is longer

than 16 feet (5 m).

2 Interfacing

D 7/D 7 S/D 7 LTD

Note:

BDA D 7_Hex_D030835:BDA_A6_2006 02/16/2009 15:49 Seite 15 (Sc

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 63 64

No comments

AKG D7 (S) Specifications Page 15