AKG P170 Operations Instructions download pdf (Page 19)

P170 19

Troubleshooting

Problem Possible Cause

Remedy

No sound Power to mixer and/or amplifier is

off.

Switch power to mixer or amplifier

on.

Channel or master fader on mixer,

or volume control on amplifier is at

zero.

Set channel or master fader on mixer

or volume control on amplifier to

desired level.

Microphone is not connected to

mixer or amplifier.

Connect microphone to mixer or

amplifier.

Cable connectors are seated

loosely.

Check cable connectors for secure

seat.

Cable is defective.

Check cable and replace if damaged.

No supply voltage

Switch phantom power on.

Check cable and replace if

necessary.

Distortion

Channel gain control on mixer set

too high.

Turn gain control down CCW.

Microphone too close to sound

source.

Move microphone further away from

sound source.

Microphone sensitivity set too high.

Switch preattenuation pad in.

Crackling noises or low outpu

Partial short circuits due to

excessive humidity.

Place microphone in warm, dry room

and allow to dry.

6 Troubleshooting

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 43 44

Comments to this Manuals

No comments

AKG P170 Operations Instructions Page 19

Comments to this Manuals

Related products and manuals for Microphones AKG P170