AKG PS 4000 Specifications download pdf (Page 3)

AKG PS 4000

1. Do not spill any liquids on the equipment and do not drop any objects through the ventilation slots in

the equipment.

2. The equipment may be used in dry rooms only.

3. The equipment may be opened, serviced, and repaired by authorized personnel only. the equipment

contains no user-serviceable parts.

4. Before connecting the equipment to power, check that the AC mains voltage stated on the supplied

power supply is identical to the AC mains voltage available where you will use the equipment.

5. Operate the equipment with the supplied 12 VDC power supply. Using adapters with an AC output

and/or a different output voltage may cause serious damage to the equipment.

6. If any solid object or liquid penetrates into the equipment, shut down the sound system immediately.

Disconnect the power supply from the power outlet immediately and have the equipment checked by

AKG service personnel.

7. If you will not use the equipment for a long period of time, disconnect the power supply from the

power outlet. Please note that the equipment will not be fully isolated from power when you set the

power switch to OFF.

8. Do not place the equipment near heat sources such as radiators, heating ducts, or amplifiers, etc. and

do not expose it to direct sunlight, excessive dust, moisture, rain, mechanical vibrations, or shock.

9. To avoid hum or interference, route all audio lines, particularly those connected to the microphone

inputs, away from power lines of any type. If you use cable ducts, be sure to use separate ducts for

the audio lines.

10.Clean the equipment with a moistened (not wet) cloth only. Be sure to disconnect the power supply

from the power outlet before cleaning the equipment! Never use caustic or scouring cleaners or clean-

ing agents containing alcohol or solvents since these may damage the enamel and plastic parts.

11.Use the equipment for the applications described in this manual only. AKG cannot accept any liabili-

ty for damages resulting from improper handling or misuse.

1. The power supply will draw a small amount of current even when the equipment is switched off. To

save energy, disconnect the power supply from the power outlet if you will leave the equipment

unused for a long period of time.

2. When scrapping the equipment, separate the case, circuit boards, and cables, and dispose of all com-

ponents in accordance with local waste disposal rules.

Thank you for purchasing an AKG product. This Manual contains important instructions for setting up and

operating your equipment. Please take a few minutes to read the instructions below carefully before oper-

ating the equipment. Please keep the Manual for future reference. Have fun and impress your audience!

Check that the packaging contains all of the components listed above. Should anything be missing,

please contact your AKG dealer.

1 Safety and Environment

1.1 Safety

1.2 Environment

2.1 Introduction

2.2 Unpacking

2.3 Optional Accessories

2 Description

1 PS 4000 antenna splitter 1 12 VDC power supply 1 rack mount kit

• SRA 1 passive directional antenna

• SRA 2 B active directional antenna

• RA 4000 B active omnidirectional

antenna

• AB 4000 antenna booster with N

connectors (AB 4000/N) or BNC

connectors (AB 4000/BNC)

• MK PS antenna cables

• PSU 4000 central power supply

• ASU 4000 remote power adapter

1670_03_PS4000_DT-IT-FRZ 13.10.2003 10:09 Uhr Seite 12

1 2 3 4 5 6 7 8 ... 13 14

Comments to this Manuals

No comments

AKG PS 4000 Specifications Page 3

Comments to this Manuals

Related products and manuals for Microphones AKG PS 4000